| |
 Download PDF data sheet
Key Features
|
AT3, double 3 in Auto Programming System, offers total solution in IC programming field.
Double 3 in 1 benefits never seen in the market before:
- Integrate 3 packing types in 1 system - Tray, Tube and Tape.
- Integrate 3 job functions in 1 system - Programming, Marking and Packing Conversion.
A real universal IC programming system which combine IC programming, marking and packing conversion into one single operation for most of IC products on/in tray, tube and tape.
AT3, the right technology, the right support and the right choice you really need for your comprehensive production environment. |
|
| |
Excellent performance
The system can operate a variety of input and output options with tray, tube and tape thus provides programming, marking and packing conversion for most of IC products on/in tray, tube and tape.
Intelligent operation
Automatic pick and place operation in sequence of loading / positioning / programming /sorting / marking (works with external printer) / unloading with powerful software control.
Efficient programming
Being built in the new generation programmer, ALL-100, which is designed with high speed CPU, built-in FPGA, high capacity pin drivers and USB interface, thus providing a high speed, low noise, stable and reliable programming platform.
Optional marking
Working with external printer, system provides IC dot / checksum marking before taping.
Flexible packing conversion
Offer IC packing conversion between tray, tube and tape through fast change-over tray / tube / tape loader / unloader installed to the working platform.
Accurate positioning
Being equipped with two precise CCD. One fixed, upward CCD for IC positioning while the other carried, downward CCD for sockets / pick & place spots positioning.
Multi-site programming
Up to 4 sets / 32 sites can program simultaneously, thus minimizing handler idle time when programming high density memory devices.
High throughput
1,000 UPH @ zero programming time. 3.6 sec/unit handler index time.
Minimize setup change
Universal pin driver design makes socket module universal for various product types with same package, thus minimizing setup change when switching product types for programming. If it comes with the same package, no any hardware change is needed. If package is different, only need a simple pull-plug for socket module replacement.
Fast change-over and easy maintenance
Power-on self diagnostics available. Module design allows easy maintenance, repair and replacement as well as fast change-over between I/O media.
Powerful operation software
Both setup data and test results are automatically saved for next power-on operation as well as for quality / yield traceability. Graphical user interface makes it easy to access.
Compact size
Only 800mm(W) x 900mm(D) x 1200mm(H) in dimension for base unit. Providing optimum production space. |
|
| |
Motion
Throughput : 1,000UPH, 3.6sec/unit handler index time.
X-Y drive : High performance servo drive
system.
Transmission : Ball screw & linear guide
mechanism.
Resolution : X axis ± 0.02mm,
Y axis ± 0.02mm,
Z axis ± 0.02mm.
Max. stroke : X axis: 365mm,
Y axis : 595mm,
Z axis: 25mm.
Theta axis resolution : 0.5°.
Pick & Place head placement accuracy : 0.08mm.
Pick & Place head placement force : <1.6kg.
Component processing range : SO8 ~ QFP256.
Vision
Camera : 752x582 pixels CCD x 2.
Field of view : 19.2mm x 19.2mm.
Vision alignment :Corner of body.
Vision resolution : ± 0.08mm.
Process time per view : ~ 0.3 sec.
Programming
Built-in programmer : ALL-100 Universal Programmer.
Programming site : 8 sites x 4 sets = 32 sites.
Pin driver : 68 universal pin drivers per set.
Applicable products : PROM, EPROM, EEPROM, FLASH, MCU, PLD, PAL, FPGA.
Applicable packages: SOP, SSOP, PLCC, MLF, TSOP, BGA, BGA, QFP, TQFP.
I/O media
JEDEC Tray :One tray (base)or two trays (optional) for both Fresh and Pass units.
Plates for rejects :One for vision rejects and the other for programming rejects.
Tube input :150mil, 208mil, 300mil, PLCC32, PLCC44 packages available, 4 tubes each package
Tube output :150mil, 208mil, 300mil, PLCC32, PLCC44 packages available, 4 tubes each package
Tape input : 12 ~ 34mm.
Tape output :12 ~ 34mm.
Control
Built-in Controller : PC-based control with Windows 2000.
Display : 17" TFT LCD monitor.
Data entry : Keyboard / mouse.
Power
AC voltage :208 ~ 240V / 50-60Hz.
Power consumption : 1.0 KVA.
Internal DC voltages :5V, 24V.
Air
Air pressure : 80 psi (5.56 bar).
Air consumption :32 lt/min.
Dimension
W x D x H : 800mm x 900mm (base unit) x 1200mm. ( H: 1660mm with tower light installed )
W x D x H : 800mm x 1130mm (with tube-in / tube-out media installed) x 1200mm.
W x D x H : 800mm x 1500mm (with tape-in / tape-out media installed) x 1200mm.
Weight
~ 150kg. |
|
